To Next Page

To Previous Page

Command Manual – PoE

H3C S7500E Series Ethernet Switches Chapter 1 PoE Configuration Commands

1-25

Description

Use the display poe-profile interface command to display all information of the

configurations and applications of the PoE configuration file that currently takes effect

on the specified PoE interface.

Examples

# Display all information of the configurations and applications of the current PoE

configuration file applied to Ethernet 2/0/2.

<Sysname> display poe-profile interface Ethernet 2/0/2

Poe-profile Index ApplyNum Interface Current Configuration

AA3456789012345 1 2 Eth2/0/2 poe enable

poe priority critical

Table 1-18 Description on the fields of the display poe-profile interface command

Field Description

Poe-profile Name of the PoE configuration file

Index Index number of the PoE configuration file

ApplyNum

Number of PoE interfaces to which the PoE configuration

file is applied

Interface

Shortened form of the PoE interface to which the PoE

configuration is applied

Current Configuration

Configurations of the PoE configuration file that currently

take effect on a PoE interface

 Note:

Because not all the configurations of a PoE configuration file can be applied

successfully, only the configurations that currently take effect on the interface are

displayed.

1.1.18 poe enable

Syntax

poe enable

undo poe enable

View

PoE interface view, PoE-profile file view

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series