H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 5 IPv6 BGP Configuration Commands
5-23
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: 100 i
Refer to Table 5-5 for description on the fields above.
5.1.24 display bgp ipv6 routing-table statistic
Syntax
display bgp ipv6 routing-table statistic
View
Any view
Parameters
None
Description
Use the display bgp ipv6 routing-table statistic command to display IPv6 BGP
routing statistics.
Examples
# Display IPv6 BGP routing statistics.
<Sysname> display bgp ipv6 routing-table statistic
Total Number of Routes: 1
5.1.25 filter-policy export
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ protocol
process-id ]
undo filter-policy export [ protocol process-id ]
View
IPv6 address family view
Parameters
acl6-number: Specifies the number of an ACL6 used to match against the destination of
routing information. The number is in the range 2000 to 3999.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English