Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches Chapter 1 Basic Configuration Commands
1-2
1.1.2 clock summer-time one-off
Syntax
clock summer-time zone-name one-off start-time start-date end-time end-date
add-time
undo clock summer-time
View
User view
Parameters
zone-name: Name of the summer time, a string of 1 to 32 characters. It is case
sensitive.
start-time: Start time, in the format of HH:MM:SS (hours/minutes/seconds). The zeros
in the argument can be omitted except for indicating 0 hours.
start-date: Start date, in the format of MM/DD/YYYY (months/days/years) or
YYYY/MM/DD.
end-time: End time, in the format of HH:MM:SS (hours/minutes/seconds). The zeros in
the argument can be omitted except for indicating 0 hours.
end-date: End date, in the format of MM/DD/YYYY (months/days/years) or
YYYY/MM/DD.
add-time: Time added to the standard time of the device, in the format of HH:MM:SS
(hours/minutes/seconds). The zeros in the argument can be omitted except for
indicating 0 hours.
Description
Use the clock summer-time one-off command to adopt summer time from the
start-time of the start-date to the end-time of the end-date. Summer time adds the
add-time to the current time of the device.
Use the undo clock summer-time command to cancel the configuration of the
summer time.
After the configuration takes effect, you can use the display clock command to view it.
Besides, the time of the log or debug information is the local time of which the time zone
and summer time have been adjusted.
Note that:
z The time range from start-time in start-date to end-time in end-date must be longer
than one day and shorter than one year. Otherwise, the argument is considered as
invalid and the configuration fails.
z If the current system time is in the time range specified with this command, the
system time automatically adds “add-time” after the execution of this command.
To Next Page
Loading...
Need help?
General
