H3C S7500E Series Command Manual

Command Manual – RRPP
H3C S7500E Series Ethernet Switches Chapter 1 RRPP Configuration Commands
1-13
[Sysname-rrpp-domain1] ring 10 enable
1.1.8 rrpp domain
Syntax
rrpp domain domain-id
undo rrpp domain domain-id
View
System view
Parameters
domain-id: RRPP domain ID, in the range 1 to 8.
Description
Use the rrpp domain command to create an RRPP domain and enter its view.
Use the undo rrpp domain command to remove an RRPP domain.
Note that:
z When you delete an RRPP domain, the control VLAN of it will be deleted at the
same time.
z When you delete an RRPP domain, you must ensure it has no RRPP ring.
z The data VLAN in one domain must be isolated from the data VLAN in another.
Related commands: control-vlan, ring, ring enable, rrpp enable, timer.
Examples
# Create RRPP domain 1.
<Sysname> system-view
[Sysname] rrpp domain 1
Info: Create a new domain.
[Sysname-rrpp-domain1]
1.1.9 rrpp enable
Syntax
rrpp enable
undo rrpp enable
View
System view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English