H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches Chapter 1 IPv6 Basics Configuration Commands
1-4
TimeStamp : Date- 8/29/2007, Time- 10:11:42
Interface : InLoopBack0
Table 1-3 Description on fields of the display ipv6 fib command
Field Description
Total number of Routes Total number of routes in the FIB
Destination
Destination address to which a packet is to be
forwarded
PrefixLength Prefix length of the destination address
NextHop Next hop of the route to the destination
Flag
Route flag:
z U — Usable route
z G — Gateway route
z H — Host route
z B — Black hole route
z D — Dynamic route
z S — Static route
Label Label
Tunnel ID ID of a tunnel
TimeStamp Generation time of a FIB entry
Interface Outgoing interface that forwards packets
1.1.4 display ipv6 host
Syntax
display ipv6 host
View
Any view
Parameters
None
Description
Use the display ipv6 host command to display the mappings between host names
and IPv6 addresses in the static DNS database.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English