H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 5 IPv6 BGP Configuration Commands
5-52
external: Resets all the EBGP connections.
internal: Resets all the IBGP connections.
Description
Use the reset bgp ipv6 command to reset specified IPv6 BGP connections.
Examples
# Reset all the IPv6 BGP connections.
<Sysname> reset bgp ipv6 all
5.1.62 reset bgp ipv6 dampening
Syntax
reset bgp ipv6 dampening [ ipv6-address prefix-length ]
View
User view
Parameters
ipv6-address: IPv6 address
prefix-length: Prefix length of the address, in the range 0 to 128.
Description
Use the reset bgp ipv6 dampening command to clear dampened IPv6 BGP route
information and release suppressed routes.
If no ipv6-address prefix-length is specified, all dampened IPv6 BGP route information
will be cleared.
Examples
# Clear the dampened information of routes to 2345::/64 and release suppressed
routes.
<Sysname> reset bgp ipv6 dampening 2345:: 64
5.1.63 reset bgp ipv6 flap-info
Syntax
reset bgp ipv6 flap-info [ ipv6-address/prefix-length | regexp as-path-regexp |
as-path-acl as-path-acl-number ]
View
User view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English