H3C S7500E Series Command Manual

Command Manual – DNS
H3C S7500E Series Ethernet Switches Chapter 1 DNS Configuration Commands
1-3
Field Description
IP Address IP address for the corresponding domain name
TTL Time that a mapping can be stored in the cache (in seconds).
 Note:
A domain name in the display dns dynamic-host command contains 21 characters at
most. If a domain name consists of more than 21 characters, only the first 21 characters
are displayed.
1.1.3 display dns proxy table
Syntax
display dns proxy table
View
Any view
Parameters
None
Description
Use the display dns proxy table command to display the DNS proxy table.
Examples
# Display the DNS proxy table.
<Sysname> display dns proxy table
Source IP Source Port Trans ID Server IP Aging
192.168.0.98 1030 24580 192.168.111.244 35
Table 1-3 Description on the fields of the display dns proxy table command
Field Description
Source IP
Source IP address of the DNS request, that is, the IP
address of the DNS client.
Source Port Source port number of the DNS request
Trans ID Transaction ID of the DNS request

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English