To Next Page

To Previous Page

Command Manual – SSH

H3C S7500E Series Ethernet Switches Chapter 1 SSH Configuration Commands

1-5

1.1.5 display ssh server

Syntax

display ssh server { status | session }

View

Any view

Parameters

status: Displays the status information of the SSH server.

session: Displays the session information of the SSH server.

Description

Use the display ssh server command to display the status information or session

information of an SSH server.

Related commands: ssh server authentication-retries, ssh server rekey-interval,

ssh server authentication-timeout, ssh server enable, ssh server

compatible-ssh1x enable.

Examples

# Display the status information of the SSH server.

<Sysname> display ssh server status

SSH Server: Disable

SSH version : 1.99

SSH authentication-timeout : 60 second(s)

SSH server key generating interval : 0 hour(s)

SSH Authentication retries : 3 time(s)

SFTP Server: Disable

SFTP Server Idle-Timeout: 10 minute(s)

Table 1-4 Description on fields of the display ssh server status command

Field Description

SSH Server Whether the SSH server function is enabled

SSH version

SSH protocol version

When the SSH server supports SSH1, the

protocol version is 1.99. Otherwise, the

protocol version is 2.0.

SSH authentication-timeout Authentication timeout period

SSH server key generating interval SSH server key pair update interval

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series