H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches Chapter 1 SNMP Configuration Commands
1-7
Field Description
GetNextRequest-PDU accepted and
processed
Number of getNext requests that have
been received and processed
GetBulkRequest-PDU accepted and
processed
Number of getBulk requests that have
been received and processed
GetResponse-PDU accepted and
processed
Number of get responses that have been
received and processed
SetRequest-PDU accepted and
processed
Number of set requests that have been
received and processed
Trap PDUs accepted and processed
Number of Trap messages that have
been received and processed
Alternate Response Class PDUs
dropped silently
Number of dropped response packets
Forwarded Confirmed Class PDUs
dropped silently
Number of forwarded packets that have
been dropped
1.1.6 display snmp-agent sys-info
Syntax
display snmp-agent sys-info [ contact | location | version ] *
View
Any view
Parameters
contact: Displays the contact information of the current network administrator.
location: Displays the location information of the current device.
version: Displays the version of the current SNMP agent.
Description
Use the display snmp-agent sys-info command to display the current SNMP system
information.
If no keyword is specified, all SNMP agent system information will be displayed.
Examples
# Display the current SNMP agent system information.
<Sysname> display snmp-agent sys-info
The contact person for this managed node:
Hangzhou H3C Technologies Co., Ltd.
The physical location of this node:

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English