Command Manual – Login
H3C S7500E Series Ethernet Switches
Chapter 1 Commands for Logging into an
Ethernet Switch
1-7
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
A : Authenticate use AAA.
L : Authentication use local database.
N : Current UI need not authentication.
P : Authenticate use current UI's password.
Table 1-1 Descriptions on the fields of the display user-interface command
Filed Description
+ The information displayed is about the current user interface.
F
The information displayed is about the current user interface. And
the current user interface operates in asynchronous mode.
Idx The absolute index of the user interface
Type User interface type and the relative index
Tx/Rx Transmission speed of the user interface
Modem Indicates whether or not a modem is used.
Privi The available command level
Auth The authentication mode
Int The physical position of the user interface
1.1.7 display users
Syntax
display users [ all ]
View
Any view
Parameters
all: Displays the information about all user interfaces.
Description
Use the display users command to display the information about user interfaces. If
you do not specify the all keyword, only the information about the current user interface
is displayed.
To Next Page
Loading...
Need help?
General
