H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches Chapter 1 DHCP Server Configuration Commands
1-26
z If you use the static-bind mac-address or static-bind client-identifier
command repeatedly, the latest configuration will overwrite the previous one.
Relate command: dhcp server ip-pool, static-bind client-identifier and static-bind
ip-address.
Examples
# Bind the client MAC address 0000-e03f-0305 to the IP address 10.1.1.1 with the
mask 255.255.255.0 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] static-bind ip-address 10.1.1.1 mask 255.255.255.0
[Sysname-dhcp-pool-0] static-bind mac-address 0000-e03f-0305
1.1.32 tftp-server domain-name
Syntax
tftp-server domain-name domain-name
undo tftp-server domain-name
View
DHCP address pool view
Parameters
domain-name: TFTP server name, a string of 1 to 63 characters.
Description
Use the tftp-server domain-name command to specify a TFTP server name in a
DHCP address pool.
Use the undo tftp-server domain-name command to remove the TFTP server name
from a DHCP address pool.
By default, no TFTP server name is specified.
Using the tftp-server domain-name command repeatedly will overwrite the previous
configuration.
Examples
# Specify the TFTP server name as aaa in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] tftp-server domain-name aaa

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English