H3C S7500E Series Command Manual

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-27
 Note:
By default, the logfile is automatically saved under the logfile directory (cf:/logfile) of the
CF card. If there is no CF card on the device, you need to use the info-center logfile
switch-directory command to specify the directory to save the file; otherwise, the
system prompts error.
Examples
# Set to manually save the log buffer contents into the log file.
<Sysname> logfile save
1.1.26 reset logbuffer
Syntax
reset logbuffer
View
User view
Parameters
None
Description
Use the reset logbuffer command to reset the log buffer contents.
Examples
# Reset the log buffer contents.
<Sysname> reset logbuffer
1.1.27 reset trapbuffer
Syntax
reset trapbuffer
View
User view
Parameters
None

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English