H3C S7500E Series Command Manual

Command Manual – IP Addressing and Performance
H3C S7500E Series Ethernet Switches
Chapter 2 IP Performance Configuration
Commands
2-10
Table 2-5 Description on the fields of the display ip statistics command
Field Description
sum Total number of packets received
local Total number of packets with destination being local
bad protocol Total number of unknown protocol packets
bad format Total number of packets with incorrect format
bad checksum Total number of packets with incorrect checksum
Input:
bad options Total number of packets with incorrect option
forwarding Total number of packets forwarded
local Total number of packets sent from the local
dropped Total number of packets discarded
no route
Total number of packets for which no route is
available
Output:
compress fails Total number of packets failed to compress
input Total number of fragments received
output Total number of fragments sent
dropped Total number of fragments dropped
fragmented Total number of packets successfully fragmented
Fragment:
couldn't
fragment
Total number of packets that failed to be fragmented
sum Total number of packets reassembled
Reassemb
ling
timeouts Total number of reassembly timeout fragments
2.1.7 display tcp statistics
Syntax
display tcp statistics
View
Any view
Parameters
None
Description
Use the display tcp statistics command to display statistics of TCP traffic.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English