H3C S7500E Series Command Manual

Command Manual – IP Addressing and Performance
H3C S7500E Series Ethernet Switches
Chapter 2 IP Performance Configuration
Commands
2-16
Use the undo ip forward-broadcast command to disable an interface from forwarding
directed broadcasts.
By default, an interface is disabled from forwarding directed broadcasts.
Examples
# Allow VLAN-interface 2 to forward directed broadcasts permitted by ACL 2001.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ip forward-broadcast acl 2001
2.1.11 ip forward-broadcast (system view)
Syntax
ip forward-broadcast
undo ip forward-broadcast
View
System view
Parameters
None
Description
Use the ip forward-broadcast command to enable the device to receive directed
broadcasts.
Use the undo ip forward-broadcast command to disable the device from receiving
directed broadcasts.
By default, the feature is disabled from receiving directed broadcasts.
Examples
# Enable the device to receive directed broadcasts.
<Sysname> system-view
[Sysname] ip forward-broadcast
2.1.12 ip redirects enable
Syntax
ip redirects enable
undo ip redirects

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English