H3C S7500E Series

Command Manual – PoE
H3C S7500E Series Ethernet Switches Chapter 1 PoE Configuration Commands
1-18
DC Output State : Normal
Table 1-10 Description on the fields of display poe-power dc-output state
Field Description
DC Output State DC output state. See Table 1-8.
1.1.12 display poe-power dc-output value
Syntax
display poe-power dc-output value
View
Any view
Parameters
None
Description
Use the display poe-power dc-output value command to display the parameter
values of the DC output power.
Examples
# Display the parameter values of the DC output power.
<Sysname> display poe-power dc-output value
DC Output Voltage : 54.05 V
DC Output Current : 0.35 A
Table 1-11 Description on the fields of display poe-power dc-output value
Field Description
DC Output Voltage DC output voltage
DC Output Current DC output current
1.1.13 display poe-power status
Syntax
display poe-power status