Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-5
 Note:
Only devices that support the logfile feature display the related logfile information after
the execution of the display info-center command.
1.1.3 display logbuffer
Syntax
display logbuffer [ level severity | size buffersize | slot slotnum] * [ | { begin | exclude
| include } text ]
View
Any view
Parameters
level severity: Displays information of the log with specified level, where severity
represents information level, in the range 0 to 7.
Table 1-4 Severity description
Severity Value Description
emergencies 0 The system is unavailable
alerts 1 Information that requires prompt reaction
critical 2 Critical information
errors 3 Error information
warnings 4 Warnings
notifications 5 Normal errors with important information
informational 6 Informational information to be recorded
debugging 7 Debugging information
size buffersize: Displays specified number of the latest log messages in the log buffer,
where buffersize represents the number of the latest log messages to be displayed in
the log buffer, in the range 1 to 1,024.
slot slotnum: Slot number.
|: Uses a regular expression to filter the output information. For detailed information
about regular expression, refer to section CLI Display in System Maintaining and
Debugging.
To Next Page
Loading...
Need help?
General
