H3C S7500E Series Command Manual

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-4
Table 1-3 Description on the fields of the display info-center command
Field Description
Information Center
The current state of the information center,
which could be enabled or disabled.
Log host:
2.2.2.2, channel number : 8,
channel name : channel8,
host facility local7
The information of the log host channel (It can
be displayed only when the info-center loghost
command is configured), including IP address of
the log host, the channel number(s) and channel
name(s) used, and logging facility used.)
Console:
channel number : 0, channel
name : console
The console channel information, including the
channel number(s) and channel name(s) used
Monitor:
channel number : 1, channel
name : monitor
The monitor channel information, including the
channel number(s) and channel name(s) used
SNMP Agent:
channel number : 5, channel
name : snmpagent
The SNMP agent channel information, including
the channel number(s) and channel name(s)
used
Log buffer:
enabled,max buffer size 1024,
current buffer size 512,
current messages 512,
dropped messages 0,
overwritten messages 740
channel number : 4, channel
name : logbuffer
The information of the log buffer channel,
including whether it is enabled or disabled, the
maximum capacity, the current capacity, the
current number of messages, the number of
dropped messages, the number of messages
that have been overwritten, and the channel
number(s) and channel name(s) used.
Trap buffer:
enabled,max buffer size 1024,
current buffer size 256,
current messages 216,
dropped messages 0,
overwritten messages 0
channel number : 3, channel
name : trapbuffer
The information of the trap buffer channel,
including whether it is enabled or disabled, the
maximum capacity, the current capacity, the
current number of messages, the number of
dropped messages, the number of messages
that have been overwritten, and the channel
number(s) and channel name(s) used.
logfile:
channel number:9, channel
name:channel9
The logfile configurations information, including
the channel number(s), and channel name(s)
used.
Information timestamp setting
The timestamp configurations, specifying the
timestamp format for log, trap, debug, and log
host information.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English