H3C S7500E Series

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 5 BGP Configuration Commands
5-25
Table 5-7 Description on the fields of the display bgp routing-table dampened
command
Field Description
From IP address from which the route was received
Reuse Reuse time of the route
Refer to
Table 5-6 for description on the other fields above.
5.1.26 display bgp routing-table dampening parameter
Syntax
display bgp routing-table dampening parameter
View
Any view
Parameters
None
Description
Use the display bgp routing-table dampening parameter command to display BGP
route dampening parameters.
Related commands: dampening.
Examples
# Display BGP route dampening parameters.
<Sysname> display bgp routing-table dampening parameter
Maximum Suppress Time(in second) : 3069
Ceiling Value : 16000
Reuse Value : 750
HalfLife Time(in second) : 900
Suppress-Limit : 2000
Table 5-8 Description on the fields of the display bgp routing-table dampening
parameter command
Field Description
Maximum Suppress Time Maximum Suppress Time
Ceiling Value Upper limit of penalty value
Reuse Value Limit for a route to be desuppressed