H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches Chapter 4 DHCP Snooping Configuration Commands
4-7
4.1.8 reset dhcp-snooping
Syntax
reset dhcp-snooping { all | ip ip-address }
View
User view
Parameters
all: Clears all DHCP snooping binding information.
ip ip-address: Clears the DHCP snooping binding information of the specified IP
address.
Description
Use the reset dhcp-snooping command clear DHCP snooping binding information.
For a distributed device, DHCP snooping binding information on all slots will be cleared
after you execute this command.
Examples
# Clear all DHCP binding information.
<Sysname> reset dhcp-snooping all

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English