H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 4 PIM Configuration Commands
4-6
4.1.7 c-bsr hash-length
Syntax
c-bsr hash-length hash-length
undo c-bsr hash-length
View
PIM view
Parameters
hash-length: Hash mask length for RP selection calculation, in the range of 0 to 32.
Description
Use the c-bsr hash-length command to configure the global Hash mask length for RP
selection calculation.
Use the undo c-bsr hash-length command to restore the system default.
By default, the Hash mask length for RP selection calculation is 30.
Related commands: c-bsr, c-bsr global, c-bsr group.
Examples
# Set the global Hash mask length for RP selection calculation to 16.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-bsr hash-length 16
4.1.8 c-bsr holdtime
Syntax
c-bsr holdtime interval
undo c-bsr holdtime
View
PIM view
Parameters
interval: Bootstrap timeout in seconds, with an effective range of 1 to 2,147,483,647.
Description
Use the c-bsr holdtime command to configure the bootstrap timeout time, namely the
length of time a C-BSR waits before it must receive a bootstrap message from the BSR.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English