Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-35
Field Description
Quiet-interval(min) Quiet interval for the primary server
Username format Format of the username
Data flow unit Unit of data flows
Packet unit Unit of packets
Total 1 RADIUS scheme(s) 1 RADIUS scheme in total
1.2.3 display radius statistics
Syntax
display radius statistics [ slot slot-number ]
View
Any view
Parameters
slot slot-number: Specifies the slot where the interface card is inserted.
Description
Use the display radius statistics command to display statistics about RADIUS
packets.
Related commands: radius scheme.
Examples
# Display statistics about RADIUS packets.
<Sysname> display radius statistics
Slot 0:state statistic(total=4096):
DEAD = 4096 AuthProc = 0 AuthSucc = 0
AcctStart = 0 RLTSend = 0 RLTWait = 0
AcctStop = 0 OnLine = 0 Stop = 0
Received and Sent packets statistic:
Sent PKT total = 0 Received PKT total = 0
RADIUS received packets statistic:
Code = 2 Num = 0 Err = 0
Code = 3 Num = 0 Err = 0
Code = 5 Num = 0 Err = 0
Code = 11 Num = 0 Err = 0