Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-2
1.1.2 accounting default
Syntax
accounting default { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local |
none | radius-scheme radius-scheme-name [ local ] }
undo accounting default
View
ISP domain view
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its
name, which is a string of 1 to 32 characters.
local: Performs local accounting.
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which
is a string of 1 to 32 characters.
Description
Use the accounting default command to specify the default accounting scheme for all
types of users.
Use the undo accounting default command to restore the default.
By default, the accounting scheme is local.
Note that:
z The RADIUS or HWTACACS scheme specified for the current ISP domain must
have been configured.
z The accounting scheme specified with the accounting default command is for all
types of users and has a priority lower than that for a specific access mode.
z Local accounting is only for managing the local user connection number; it does
not provide the statistics function. The local user connection number management
is only for local accounting; it does not affect local authentication and
authorization.
z With the access mode of login, accounting is not supported for FTP services.
Related commands: authentication default, authorization default, hwtacacs
scheme, radius scheme.
Examples
# Configure the default ISP domain system to use the local accounting scheme for all
types of users.
<Sysname> system-view
To Next Page
Loading...
Need help?
General
