H3C S7500E Series

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-23
If the specified ISP domain does not exist, the system will create a new ISP domain. All
the ISP domains are in the active state when they are created.
Related commands: access-limit, state, display domain.
Examples
# Create ISP domain aabbcc.net, and enter ISP domain view.
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net]
1.1.22 domain default
Syntax
domain default { disable | enable isp-name }
View
System view
Parameters
disable: Disables the configured default ISP domain.
enable: Enables the configured default ISP domain.
isp-name: Name of the ISP, a string of 1 to 24 characters.
Description
Use the domain default command to manually configure the system default ISP
domain.
By default, the default domain is named system.
Note that:
z There must be only one default ISP domain.
z When configure a default domain, this domain must have existed.
z The default domain configured cannot be deleted unless you cancel it as a default
domain first.
Related commands: state, display domain.
Examples
# Create a new ISP domain named aabbcc.net, and configure it as the default ISP
domain.
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net] quit