Command Manual – ARP
H3C S7500E Series Ethernet Switches Chapter 1 ARP Configuration Commands
1-5
verbose: Displays the detailed information about ARP entries.
|: Uses a regular expression to specify the ARP entries to be displayed. For detailed
information about regular expression, refer to the part discussing CLI display in System
Maintaining and Debugging Configuration.
begin: Displays the ARP entries from the first one containing the specified string.
exclude: Displays the ARP entries that do not contain the specified string.
include: Displays the ARP entries that contain the specified string.
string: A case-sensitive string for matching, consisting of 1 to 256 characters.
Description
Use the display arp ip-address command to display the ARP entry for a specified IP
address.
Related commands: arp static, reset arp.
Examples
# Display the corresponding ARP entry for the IP address 20.1.1.1.
<Sysname> display arp 20.1.1.1
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Interface Aging Type
20.1.1.1 000f-e200-0001 N/A N/A N/A S
1.1.6 display arp timer aging
Syntax
display arp timer aging
View
Any view
Parameters
None
Description
Use the display arp timer aging command to display the aging time for dynamic ARP
entries.
Related commands: arp timer aging.
Examples
# Display the aging time for dynamic ARP entries.
[Sysname] display arp timer aging
To Next Page
Loading...
Need help?
General
