H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 4 PIM Configuration Commands
4-37
4.1.38 pim hello-option lan-delay
Syntax
pim hello-option lan-delay interval
undo pim hello-option lan-delay
View
Interface view
Parameters
interval: LAN-delay time in milliseconds, with an effective range of 1 to 32,767.
Description
Use the pim hello-option lan-delay command to configure the LAN-delay time,
namely the length of time the device waits between receiving a prune message and
taking a prune action, on the current interface.
Use the undo pim hello-option lan-delay command to restore the system default.
By default, the LAN-delay time to 500 milliseconds.
Related commands: pim hello-option override-interval, hello-option
override-interval, hello-option lan-delay.
Examples
# Set the LAN-delay time to 200 milliseconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option lan-delay 200
4.1.39 pim hello-option neighbor-tracking
Syntax
pim hello-option neighbor-tracking
undo pim hello-option neighbor-tracking
View
Interface view
Parameters
None

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English