Command Manual – VLAN
H3C S7500E Series Ethernet Switches Chapter 3 Voice VLAN Configuration Commands
3-2
Table 3-1 Description on the fields of the display voice vlan oui command
Field Description
Oui Address OUI addresses that are allowed to pass
Mask Mask of the OUI addresses that are allowed to pass
Description Description of the OUI addresses that are allowed to pass
3.1.2 display voice vlan state
Syntax
display voice vlan state
View
Any view
Parameters
None
Description
Use the display voice vlan state command to display the voice VLAN configuration.
Related commands: voice vlan enable.
Examples
# Display the voice VLAN configurations.
<Sysname> display voice vlan state
Voice VLAN status: ENABLE
Voice VLAN ID: 2
Voice VLAN security mode: Security
Voice VLAN aging time: 1440 minutes
Voice VLAN enabled port and its mode:
PORT MODE
--------------------------------
Ethernet2/0/2 MANUAL
Ethernet2/0/3 MANUAL
Ethernet2/0/4 MANUAL
Ethernet2/0/5 AUTO
To Next Page
Loading...
Need help?
General
