H3C S7500E Series Command Manual

Command Manual – Login
H3C S7500E Series Ethernet Switches
Chapter 1 Commands for Logging into an
Ethernet Switch
1-29
1.1.32 user-interface
Syntax
user-interface [ type ] first-number [ last-number ]
View
System view
Parameters
type: User interface type.
first-number: User interface index, which identifies the first user interface to be
configured.
last-number: User interface index, which identifies the last user interface to be
configured.
Description
Use the user-interface command to enter one or more user interface views to perform
configuration.
Examples
# Enter VTY 0 user interface view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface vty 0
[Sysname-ui-vty0]
1.1.33 user privilege level
Syntax
user privilege level level
undo user privilege level
View
User interface view
Parameters
level: Command level ranging from 0 to 3.
Description
Use the user privilege level command to configure the command level available to the
users logging into the user interface.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English