H3C S7500E Series

Command Manual – SSH
H3C S7500E Series Ethernet Switches Chapter 1 SSH Configuration Commands
1-8
Table 1-7 Description on fields of the display ssh user-information command
Field Description
Username Name of the user
Authentication-type Authentication type
User-public-key-name Public key of the user
Service-type Service type
1.1.8 peer-public-key end
Syntax
peer-public-key end
View
Public key view
Parameters
None
Description
Use the peer-public-key end command to return from public key view to system view.
Related commands: public-key peer.
Examples
# Exit public key view.
<Sysname> system-view
[Sysname] public-key peer key1
[Sysname-pkey-public-key] peer-public-key end
[Sysname]
1.1.9 public-key-code begin
Syntax
public-key-code begin
View
Public key view
Parameters
None