Command Manual – File System Management
H3C S7500E Series Ethernet Switches Chapter 1 File System Management Commands
1-13
<Sysname> umount cf:
% Umount cf: successfully.
%Apr 23 01:49:20:929 2003 System VFS/5/LOG:
cf: umounted from slot 4.
# Unmount a CF card of the backup board (assume the backup board is in slot 5).
<Sysname> umount slot5#cf:
% Umount slot5#cf: successfully.
%Apr 23 01:49:20:929 2003 System VFS/5/LOG:
cf: umounted from slot 5.
1.1.18 undelete
Syntax
undelete file-url
View
User view
Parameters
filename: Name of the file to be restored.
Description
Use the undelete command to restore a file from the recycle bin.
If another file with the same name exists under the same path, the undelete operation
will cause it to be overwritten and the system will ask you whether to continue.
Examples
# Restore file sample.bak from the recycle bin.
<Sysname> undelete sample.bak
Undelete flash:/sample.bak ?[Y/N]:y
.....
% Undeleted file flash:/sample.bak
1.2 Configuration File Management Commands
1.2.1 backup startup-configuration
Syntax
backup startup-configuration to dest-addr [ dest-filename ]
To Next Page
Loading...
Need help?
General
