H3C S7500E Series

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 3 OSPF Configuration Commands
3-55
neighbor: Clears neighbor statistics.
interface-type interface-number: Interface type and interface number.
router-id: Neighbor Router ID.
Description
Use the reset ospf counters command to reset OSPF counters. If no OSPF process is
specified, counters of all OSPF processes are reset.
Examples
# Reset OSPF counters.
<Sysname> reset ospf counters
3.1.53 reset ospf process
Syntax
reset ospf [ process-id ] process
View
User view
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
Description
Use the reset ospf process command to reset all OSPF processes or a specified
process.
Using the reset ospf process command will:
z Clear all invalid LSAs without waiting for their timeouts;
z Make a newly configured Router ID take effect;
z Start a new round of DR/BDR election;
z Not remove any previous OSPF configurations.
The system prompts whether to reset OSPF process upon execution of this command.
Examples
# Reset all OSPF processes.
<Sysname> reset ospf process