Command Manual – QoS
H3C S7500E Series Ethernet Switches Chapter 2 QoS Policy Configuration Commands
2-29
 Note:
Do not apply policies to a VLAN and the ports in the VLAN at the same time.
Examples
# Apply the VLAN policy named test in the inbound direction of VLAN 200, VLAN 300,
VLAN 400, VLAN 500, VLAN 600, VLAN 700, VLAN 800, and VLAN 900.
<Sysname> system-view
[Sysname] qos vlan-policy test vlan 200 300 400 500 600 700 800 900 inbound
2.3.10 reset qos policy global
Syntax
reset qos policy global { inbound | outbound }
View
User view
Parameters
inbound: Specifies the inbound direction.
outbound: Specifies the outbound direction.
Description
Use the reset qos vlan-policy command to clear the statistics of a global QoS policy.
Examples
# Clear the statistics of the global QoS policy in the inbound direction.
<Sysname> reset qos policy global inbound
2.3.11 reset qos vlan-policy
Syntax
reset qos vlan-policy [ vlan vlan-id ]
View
User view
Parameters
vlan-id: VLAN ID, in the range 1 to 4,094.
To Next Page
Loading...
Need help?
General
