H3C S7500E Series

Command Manual – SSH
H3C S7500E Series Ethernet Switches Chapter 1 SSH Configuration Commands
1-25
[Sysname] ssh server rekey-interval 3
1.1.31 ssh user
Syntax
ssh user username service-type stelnet authentication-type { password | { any |
password-publickey | publickey } assign publickey keyname }
ssh user username service-type { all | sftp } authentication-type { password | { any
| password-publickey | publickey } assign publickey keyname work-directory
directory-name }
undo ssh user username
View
System view
Parameters
username: SSH username, a string of 1 to 80 characters.
service-type: Specifies the service type of an SSH user, which can be one of the
following:
z all: Specifies both secure Telnet and secure FTP.
z sftp: Specifies the service type as secure FTP.
z stelnet: Specifies the service type of secure Telnet.
authentication-type: Specifies the authentication method of an SSH user, which can
be one the following:
z password: Performs password authentication.
z any: Performs either password authentication or publickey authentication. The
server performs publickey authentication first.
z password-publickey: Performs both password authentication and publickey
authentication. A client running SSH1 client only needs to pass either type of
authentication while a client running SSH2 client must pass both types of
authentication to log in.
z publickey: Performs publickey authentication.
assign publickey keyname: Assigns an existing public key for an SSH user. keyname
indicates the name of the client public key and is a string of 1 to 64 characters.
work-directory directory-name: Specifies the working folder for an SFTP user.
directory-name indicates the name of the working folder and is a string of 1 to 135
characters.