H3C S7500E Series Command Manual

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-11
Table 1-9 Descriptions on the fields of the display trapbuffer command
Field Description
Trapping buffer
configuration and contents
Indicates the current state of the trap buffer and its
contents, which could be enabled or disabled.
Allowed max buffer size The maximum buffer size allowed
Actual buffer size The actual buffer size
Channel number The channel number of the trap buffer, defaults to 3
Channel name
The channel name of the trap buffer, defaults to
trapbuffer
Dropped messages The number of dropped messages
Overwritten messages
The number of overwritten messages (when the
buffer size is not big enough to hold all messages,
the latest messages overwrite the old ones).
Current messages The number of the current messages
1.1.8 info-center channel name
Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Parameters
channel-number: Specifies a channel number, in the range 0 to 9.
channel-name: Specifies a channel name, a string of 1 to 30 characters, case
insensitive. It must be an alphanumeric set startting with a letter.
Description
Use the info-center channel name command to name a channel with a specified
channel number.
Use the undo info-center channel command to restore the default name for a channel
with a specified channel number.
Refer to
Table 1-1 for details of default channel names and channel numbers.
Examples
# Name channel 0 as abc.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English