H3C S7500E Series Command Manual

About This Manual
Related Documentation
In addition to this manual, each H3C S7500E Series Ethernet Switches documentation
set includes the following:
Manual Description
H3C S7500E Series Ethernet
Switches Operation Manual
It is used for assisting the users in data
configurations and typical applications. (See
the electronic documentation for details)
H3C S7500E Series Ethernet
Switches Installation Manual
It provides information for the system
installation.
Organization
H3C S7500E Series Ethernet Switches Command Manual is organized as follows:
Part Contents
1 Login
Introduces the commands used for logging into the
Ethernet switch.
2 VLAN
Introduces the commands used for configuring VLAN,
Voice VLAN, and GVRP.
3 IP Addressing and
Performance
Introduces the commands used for configuring IP
address and IP performance.
4 QinQ-BPDU
Tunneling
Introduces the commands used for configuring QinQ and
BPDU Tunneling.
5 Port Correlation
Configuration
Introduces the commands used for basic port
configuration and port isolation configuration.
6 Link Aggregation Introduces the commands used for link aggregation.
7 MAC Address Table
Management
Introduces the commands used for configuring MAC
address forwarding table.
8 IP Source Guard
Introduces the commands used for configuring MAC
address, IP address and port binding.
9 MSTP
Introduces the commands used for configuring STP and
BRDU tunnel.
10 IP Routing Overview
Introduces the commands used for displaying IP routing
tables.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English