H3C S7500E Series Command Manual

Command Manual – VLAN
H3C S7500E Series Ethernet Switches Chapter 1 VLAN Configuration Commands
1-3
Field Description
Hardware address MAC address corresponding to a VLAN interface
IPv6 Packet Frame Type IPv6 outgoing frame format
1.1.3 display vlan
Syntax
display vlan [ vlan-id1 [ to vlan-id2 ] | all | dynamic | reserved | static ]
View
Any view
Parameters
vlan-id1: Displays the information of a VLAN specified by VLAN ID in the range of 1 to
4,094.
vlan-id1 to vlan-id2: Displays the information of a range of VLANs specified by a VLAN
ID range.
all: Displays all current VLAN information except for the reserved VLAN.
dynamic: Displays the information of dynamic VLANs
reserved: Displays information of the reserved VLANs. Protocol modules determine
reserved VLANs according to function implementation, and reserved VLANs serve
protocol modules. Reserved VLANs cannot be modified.
static: Displays static VLAN information.
Description
Use the display vlan command to display VLAN information.
Related commands: vlan.
Examples
# Display VLAN 2 information.
<Sysname> display vlan 2
VLAN ID: 2
VLAN Type: static
Route interface: not configured
Description: VLAN 0002
Tagged Ports: none
Untagged Ports:
Ethernet2/0/1 Ethernet2/0/3 Ethernet2/0/4

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English