H3C S7500E Series Command Manual

Command Manual – Link Aggregation
H3C S7500E Series Ethernet Switches Chapter 1 Link Aggregation Configuration Commands
1-1
Chapter 1 Link Aggregation Configuration
Commands
1.1 Link Aggregation Configuration Commands
1.1.1 display lacp system-id
Syntax
display lacp system-id
View
Any view
Parameters
None
Description
Use the display lacp system-id command to display the local system ID (also called
the actor system ID), which comprises the system LACP priority and the system MAC
address.
Examples
# Display the local system ID.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 0000-fc00-0100
1.1.2 display link-aggregation interface
Syntax
display link-aggregation interface interface-type interface-number [ to interface-type
interface-number ]
View
Any view
Parameters
interface interface-type interface-number [ to interface-type interface-number ]:
Specifies a port range or a port if the to keyword and the second port are not specified.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English