Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration Commands
3-22
Field Description
Type Type of packet
Input Number of packets received by the interface
Output Number of packets sent by the interface
Hello Hello packet
DB Description Database description packet
Ls Req Link state request packet
Ls Upd Link state update packet
Ls Ack Link state acknowledgement packet
3.1.16 display ospfv3 topology
Syntax
display ospfv3 [ process-id ] topology [ area area-id ]
View
Any view
Parameters
process-id: Displays the topology information of an OSPFv3 process; The process ID
ranges from 1 to 65535.
area: Displays the topology information of the specified area.
area-id: ID of an area, a decimal integer (in the range of 0 to 4294967295) that is
translated into IPv4 address format by the system or an IPv4 address.
Description
Use the display ospfv3 topology command to display OSPFv3 topology information.
If no process is specified, topology information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 area 1 topology information.
<Sysname> display ospfv3 topology area 1
OSPFv3 Process (1)
OSPFv3 Area (0.0.0.1) topology
Type ID(If-Index) Bits Metric Next-Hop Interface
Rtr 1.1.1.1 --
Rtr 2.2.2.2 1 2.2.2.2 Vlan100
To Next Page
Loading...
Need help?
General
