H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches Chapter 1 IPv6 Basics Configuration Commands
1-3
Table 1-2 Description on the fields of the display dns ipv6 server command
Field Description
DNS Server
Sequence number of the DNS server, which is assigned
automatically by the system, starting from 1.
Type
Type of DNS server: S represents a statically configured
DNS server, and D represents a DNS server obtained
dynamically through DHCP.
IPv6 Address IPv6 address of the DNS server
Interface Name
Name of the interface on the DNS server whose IP
address is an IPv6 link-local address.
1.1.3 display ipv6 fib
Syntax
display ipv6 fib [ slot-number ] [ ipv6-address ]
View
Any view
Parameters
slot-number: Number of the slot whose IPv6 forwarding information base (FIB) entries
are to be displayed.
ipv6-address: Destination IPv6 address whose IPv6 FIB entries are to be displayed.
Description
Use the display ipv6 fib command to display IPv6 FIB entries. If no argument is
specified, all IPv6 FIB entries will be displayed.
Examples
# Display all IPv6 FIB entries.
<Sysname> display ipv6 fib
FIB Table:
Total number of Routes : 1
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
Destination: ::1 PrefixLength : 128
NextHop : ::1 Flag : HU
Label : NULL Tunnel ID : 0

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English