To Next Page

To Previous Page

Command Manual – DHCP

H3C S7500E Series Ethernet Switches Chapter 1 DHCP Server Configuration Commands

1-25

Note that:

z Use the static-bind ip-address command together with the static-bind

mac-address or static-bind client-identifier command to accomplish a static

binding configuration.

z If the statically bound IP address is an interface address of the DHCP server, the

static binding does not take effect.

z If you use the static-bind ip-address command repeatedly, the latest

configuration will overwrite the previous one.

Related commands: dhcp server ip-pool, static-bind client-identifier, static-bind

mac-address.

Examples

# Bind the client MAC address 0000-e03f-0305 to the IP address 10.1.1.1 with the

mask 255.255.255.0 in DHCP address pool 0.

<Sysname> system-view

[Sysname] dhcp server ip-pool 0

[Sysname-dhcp-pool-0] static-bind ip-address 10.1.1.1 mask 255.255.255.0

[Sysname-dhcp-pool-0] static-bind mac-address 0000-e03f-0305

1.1.31 static-bind mac-address

Syntax

static-bind mac-address mac-address

undo static-bind mac-address

View

DHCP address pool view

Parameters

mac-address: The MAC address of a static binding, in the format H-H-H.

Description

Use the static-bind mac-address command to statically bind a MAC address to an IP

address in a DHCP address pool.

Use the undo static-bind mac-address command to remove the statically bound

MAC address.

By default, no MAC address is statically bound.

Note that:

z Use the static-bind mac-address command together with the static-bind

ip-address command to complete a static binding configuration.

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series