H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 1 IGMP Snooping Configuration Commands
1-1
Chapter 1 IGMP Snooping Configuration
Commands
1.1 IGMP Snooping Configuration Commands
1.1.1 display igmp-snooping group
Syntax
display igmp-snooping group [ vlan vlan-id ] [ slot slot-id ] [ verbose ]
View
Any view
Parameters
vlan vlan-id: Displays the IGMP Snooping forwarding table information in the specified
VLAN, where vlan-id is in the range of 1 to 4094. If you do not specify a VLAN, this
command will display the multicast group information in all VLANs.
slot slot-id: Displays the IGMP Snooping forwarding table information for the specified
card.
verbose: Specifies to display the detailed IGMP Snooping forwarding table information.
Description
Use the display igmp-snooping group command to view the IGMP Snooping
forwarding table information.
Examples
# View the detailed IGMP Snooping forwarding table information in VLAN 2.
<Sysname> display igmp-snooping group vlan 2 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, A-Aggregation port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):2.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English