Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-15
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its
name, which is a string of 1 to 32 characters.
local: Performs local authorization.
none: Does not perform any authorization. In this case, an authenticated user is
automatically authorized with the default right.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which
is a string of 1 to 32 characters.
Description
Use the authorization login command to specify the authorization scheme for login
users.
Use the undo authorization login command to restore the default.
By default, the default authorization scheme is used for login users.
Note that the RADIUS or HWTACACS scheme specified for the current ISP domain
must have been configured.
Related commands: authorization default, hwtacacs scheme, radius scheme.
Examples
# Configure the default ISP domain system to use the local authorization scheme for
login users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authorization login local
# Configure the default ISP domain system to use RADIUS authorization scheme rd
for login users and to use the local authorization scheme as the backup scheme.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authorization login radius-scheme rd local
1.1.16 authorization portal
Syntax
authorization portal { none | radius-scheme radius-scheme-name }
undo authorization portal
View
ISP domain view
To Next Page
Loading...
Need help?
General
