H3C S7500E Series Command Manual

Command Manual – QoS
H3C S7500E Series Ethernet Switches Chapter 2 QoS Policy Configuration Commands
2-27
2.3.7 qos apply policy global
Syntax
qos apply policy policy-name global { inbound | outbound }
undo qos apply policy global { inbound | outbound }
View
System view
Parameters
policy-name: Policy name.
inbound: Applies the QoS policy to the incoming packets on all ports.
outbound: Applies the QoS policy to the outgoing packets on all ports.
Description
Use the qos apply policy global command to apply a QoS policy globally. A QoS
policy applied globally takes effect on all inbound or outbound traffic depending on the
direction in which the policy is applied.
Use the undo qos apply policy global command to cancel the global application of
the QoS policy.
Note that, when you apply a QoS policy with the qos apply policy global command,
support for the inbound/outbound keyword depends on the actions defined in the
traffic behavior and LPU types, as described in
Table 2-10.
Examples
# Apply the QoS policy user1 in the inbound direction globally.
<Sysname> system-view
[Sysname] qos apply policy user1 global inbound
2.3.8 qos policy
Syntax
qos policy policy-name
undo qos policy policy-name
View
System view
Parameters
policy-name: Name of the policy to be created.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English