H3C S7500E Series

Command Manual – DHCP
H3C S7500E Series Ethernet Switches
Chapter 2 DHCP Relay Agent Configuration
Commands
2-16
DHCPACK 0
DHCPNAK 0
BOOTPREPLY 0
2.1.19 reset dhcp relay statistics
Syntax
reset dhcp relay statistics [ server-group group-id ]
View
User view
Parameters
server-group group-id: Specifies a server group ID in the range of 0 to 19 about which
to remove statistics from the relay agent.
Description
Use the reset dhcp relay statistics command to remove statistics from the relay
agent.
If no server-group is specified, all statistics will be removed from the relay agent.
Related commands: display dhcp relay statistics.
Examples
# Remove all statistics from the DHCP relay agent.
<Sysname> reset dhcp relay statistics