H3C S7500E Series Command Manual

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-30
By default, a user is authorized with no service.
Related commands: service-type ftp.
Examples
# Authorize user user1 to use the Telnet service.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] service-type telnet
1.1.30 service-type ftp
Syntax
service-type ftp
undo service-type ftp
View
Local user view
Parameters
None
Description
Use the service-type ftp command to authorize a user to use the FTP service.
Use the undo service-type ftp command to disable a user from using the FTP service.
By default, no service is authorized to a user and anonymous access to FTP service is
not allowed. If you authorize a user to use the FTP service but do not specify a directory
that the user can access, the user can access the root directory of the device by default.
Related commands: work-directory, service-type.
Examples
# Authorize user user1 to use the FTP service.
[Sysname-luser-user1] service-type ftp
1.1.31 state
Syntax
state { active | block }
View
ISP domain view, local user view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English