H3C S7500E Series Command Manual

Command Manual – File System Management
H3C S7500E Series Ethernet Switches Chapter 2 FTP Configuration Commands
2-1
Chapter 2 FTP Configuration Commands
2.1 FTP Server Configuration Commands
2.1.1 display ftp-server
Syntax
display ftp-server
View
Any view
Parameters
None
Description
Use the display ftp-server command to display the FTP server configuration of the
device.
After configuring FTP parameters, you may verify them with this command.
Related commands: ftp timeout, ftp update.
Examples
# Display the FTP server configuration.
<Sysname> display ftp-server
FTP server is running
Max user number: 1
User count: 1
Timeout value(in minute): 30
Put Method: fast
The output indicates that the FTP server is running with support to only one concurrent
login user; now one logged-in user is present; timeout of the user is 30 minutes, and
FTP update mode is fast.
2.1.2 display ftp-user
Syntax
display ftp-user

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English