H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 5 IPv6 BGP Configuration Commands
5-9
Table 5-1 Description on the fields of the display bgp ipv6 group command
Field Description
BGP peer-group Name of the peer group
remote AS AS number of the peer group
Type Type of the peer group
Maximum allowed prefix number Maximum allowed prefix number
Threshold Threshold value
hold timer value Holdtime
Keepalive timer value Keepalive interval
Minimum time between
advertisement runs
Minimum interval between advertisements
Peer Preferred Value Preferred value of the routes from the peer
No routing policy is configured No routing policy is configured for the peer
Members Group members
Peer IPv6 address of the peer
V Peer BGP version
AS AS number
MsgRcvd Number of messages received
MsgSent Number of messages sent
OutQ Number of messages to be sent
PrefRcv Number of prefixes received
Up/Down
The lasting time of a session/the lasting time
of present state (when no session is
established)
State State machine of peer
5.1.11 display bgp ipv6 network
Syntax
display bgp ipv6 network
View
Any view
Parameters
None

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English