H3C S7500E Series

Command Manual – Portal
H3C S7500E Series Ethernet Switches Chapter 1 Portal Configuration Commands
1-6
1.1.3 display portal free-rule
Syntax
display portal free-rule [ rule-number ]
View
Any view
Parameters
rule-number: Number of a portal-free rule, in the range 0 to 31.
Description
Use the display portal free-rule command to display information about a specified
portal-free rule or all portal-free rules.
Related commands: portal free-rule.
Examples
# Display information about portal-free rule 1.
<Sysname> display portal free-rule 1
Rule-Number 1:
Source:
IP = 2.2.2.0
Mask = 255.255.255.0
MAC = 0000-0000-0000
Interface = any
Vlan = 0
Destination:
IP = 0.0.0.0
Mask = 0.0.0.0
Table 1-3 Description on the fields of the display portal free-rule command
Field Description
Rule-Number Number of the portal-free rule
Source Source information in the portal-free rule
IP Source IP address in the portal-free rule
Mask Subnet mask of the source IP address in the portal-free rule
MAC Source MAC address in the portal-free rule
Interface Source interface in the portal-free rule
Vlan Source VLAN in the portal-free rule