Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-10
Table 1-8 Descriptions on the fields of the display logfile summary command
Field Description
Log file is
The current state of a log file, which could be enabled or
disabled.
Channel number The channel number of a log file, defaults to 9.
Log file size quota The maximum storage space reserved for a log file
Log file directory Log file directory
Writing frequency Log file writing frequency
1.1.7 display trapbuffer
Syntax
display trapbuffer [ size buffersize ]
View
Any view
Parameters
size buffersize: Displays specified number of the latest trap messages in a trap buffer,
where buffersize represents the number of the latest trap messages in a trap buffer, in
the range 1 to 1,024.
Description
Use the display trapbuffer command to display the state and the trap information
recorded.
Absence of the size buffersize argument indicates that all trap information is displayed.
Examples
# Display the state of the trap buffer and the trap information recorded.
<Sysname> display trapbuffer
Trapping buffer configuration and contents:enabled
Allowed max buffer size : 1024
Actual buffer size : 256
Channel number : 3 , channel name : trapbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 0
To Next Page
Loading...
Need help?
General
