H3C S7500E Series

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 5 IPv6 BGP Configuration Commands
5-18
Description
Use the display bgp ipv6 routing-table dampened command to display the IPv6
BGP dampened routes.
Examples
# Display IPv6 BGP dampened routes.
<Sysname> display bgp ipv6 routing-table dampened
BGP Local router ID is 1.1.1.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*d Network : 111:: PrefixLen : 64
From : 122::1 Reuse : 00:29:34
Path/Ogn: 200?
Table 5-6 Description on the fields of the display bgp ipv6 routing-table dampened
command
Field Description
From Source IP address of a route
Reuse Time for reuse
Refer to
Table 5-5 for description on the fields above.
5.1.19 display bgp ipv6 routing-table dampening parameter
Syntax
display bgp ipv6 routing-table dampening parameter
View
Any view
Parameters
None
Description
Use the display bgp ipv6 routing-table dampening parameter command to display
IPv6 BGP routing dampening parameters.
Related commands: dampening.