H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 4 PIM Configuration Commands
4-18
4.1.19 display pim interface
Syntax
display pim interface [ interface-type interface-number ] [ verbose ]
View
Any view
Parameters
interface-type interface-number: Displays the PIM information on a particular interface.
verbose: Displays the detailed PIM information.
Description
Use the display pim interface command to view the PIM information on the specified
interface or all interfaces.
Examples
# View the PIM information on all interfaces.
<Sysname> display pim interface
Interface NbrCnt HelloInt DR-Pri DR-Address
Vlan1 1 30 1 10.1.1.2
Vlan2 0 30 1 172.168.0.2 (local)
Vlan3 1 30 1 20.1.1.2
Table 4-5 Description on the fields of the display pim interface command
Field Description
Interface Interface name
NbrCnt Number of PIM neighbors
HelloInt Hello interval
DR-Pri Priority for DR election
DR-Address DR IP address
# View the detailed PIM information on VLAN-interface 1.
<Sysname> display pim interface Vlan-interface 1 verbose
Interface: Vlan-interface1, 10.1.1.1
PIM version: 2
PIM mode: Sparse
PIM DR: 10.1.1.2
PIM DR Priority (configured): 1

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English